Knowledge Base

Design & Configure

RIP Passive interface

Technology: Routing
Area: IGP
Vendor: Cisco
Software: 12.X , 15.X
Platform: 3560,3750,3850,4500,6500,6800, ISR Routers, ASR Routers

By default, RIP sends updates on all interfaces on which RIP is enabled. For example if you are running it on interfaces (all interfaces which addresses beginning with 10.) and you want to stop updating on particular interface, use passive-interface command:

Router(config)# router rip
Router(config-router)# passive-interface GigabitEthernet 0/1

Author: Marcin Bialy