Access port config (Huawei)

Technology: Switching
Area: Neighbor Discovery
Vendor: Huawei
Software: eNSP
Platform: Quidway switches

An access port belongs to and carries the traffic of only one VLAN within 2-layer switch. Traffic is both received and sent in native formats with no VLAN tagging whatsoever. Anything arriving on an access port is simply assumed to belong to the VLAN assigned to the port.

To configure port in vlan 6:

<HUAWEI> system-view
[HUAWEI] interface GigabitEthernet 0/0/13
[HUAWEI-GigabitEthernet 0/0/13]port link-type access
[HUAWEI-GigabitEthernet 0/0/13]port default vlan 6
[HUAWEI-GigabitEthernet 0/0/13]quit

Check how to configure trunk port on Huawei switch