Knowledge Base

Our knowledge base for your self-education

 

Design & Configure

Trunk port config (Huawei)

Technology: Switching
Area: Neighbor Discovery
Vendor: Huawei
Software: eNSP
Platform: Quidway switches

A trunk interface often connects to a switch, router, AP, or voice terminal that can receive and send tagged and untagged frames simultaneously. It allows tagged frames from multiple VLANs and untagged frames from only one VLAN called native vlan.

To configure ethernet port as a trunk port and allow to pass all vlans:

<HUAWEI> system-view
[HUAWEI] interface GigabitEthernet 0/0/13
[HUAWEI-GigabitEthernet 0/0/13]port link-type trunk
[HUAWEI-GigabitEthernet 0/0/13]port trunk allow-pass vlan all
[HUAWEI-GigabitEthernet 0/0/13]quit

 

Check how to configure access port on Huawei switch?

 
PreviousNext ?>
 

Newsletter