LACP configuration (Huawei)

Technology: Switching
Area: Link Aggregation
Vendor: Huawei
Software: eNSP
Platform: Quidway switches

Static LACP mode

Devices that are directly connected through an Eth-Trunk can support LACP, by running the mode lacp-static command you can configure the Eth-Trunk to work in static LACP mode. This mode can implement both load balancing and redundancy.

<HUAWEI> system-view
[HUAWEI] interface Eth-Trunk 1
[HUAWEI- interface Eth-Trunk 1]mode lacp-static
[HUAWEI- interface Eth-Trunk 1]quit

LACP Dynamic mode

When a server is connected to a file server over the device that has an Eth-Trunk configured, one is able to run the mode lacp-dynamic command on the device to configure its Eth-Trunk to work in dynamic mode.

<HUAWEI> system-view
[HUAWEI] interface Eth-Trunk 1
[HUAWEI- interface Eth-Trunk 1]mode lacp-dynamic
[HUAWEI- interface Eth-Trunk 1]quit