Knowledge Base

Archives

09.2020

Spanning Tree Protocol (STP) Configuration

The Spanning Tree Protocol (STP) is defined by IEEE standard 802.1D-1988. The STP generates a single spanning tree inside a network. Such mode proved to be useful for supporting applications and protocols in which frames are delivered out of sequence or as duplicates. The topology is named Spanning Tree, because it is constructed as a […]

07.2020

Router on a stick approach – Cisco configuration

A router on a stick is one of the ways to allow routing between VLANs. That kind of a setup consists of a router and a switch connected through one Ethernet link configured as an 802.1q trunk link. Such a configuration is typical in networks where no layer-3 switch exists. But first, let’s find out […]

Author: Karol Piatek
 

Newsletter